Fordmods Logo

torque ratings on i6 ef el & au 

 

Page 1 of 2 [ 27 posts ] Go to page 1, 2  Next

 
 Post subject: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 7:37 pm 
Parts Gopher
Offline

Posts: 64

Joined: 28th Oct 2007

Gallery: 1 images

Ride: XF ute

Location: Oakdale
NSW, Australia

hi everyone,does anyone know the torque output on the i6 engines fitted to ef/el & au.i have already fitted a ef motor to my xf ute however it`s stuffed.i know kilowatts are the same for all 3 engine`s.thanks
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 7:49 pm 
Getting Side Ways
Offline

Age: 35

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

off the top of my head all ef/el/au are a identical 357 Nm @3000rpm(i think)

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 9:20 pm 
Parts Gopher
Offline

Posts: 64

Joined: 28th Oct 2007

Gallery: 1 images

Ride: XF ute

Location: Oakdale
NSW, Australia

thanks,so i guess there is no real advantage in steping up to a au engine unless it`s a vct or xr.looks like it will have to be a ba / bf dohc!
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 9:24 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

the only advantage of going to a au engine is it will be much smoother and better balanced engine.
but other than that the power and torque are rated the same as ef/el from factoey...
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 10:58 pm 
Getting Side Ways
Offline

Age: 35

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

also the motor apparently has a stronger bottom end,
you don't have to bother with the head gasket woes e-series have.
compression is slightly better. also don't forget its a newer motor so chances are less km's and better condition..

if you really want to go down the road of a dohc, have a hard think and do a lot of home work, ill be budgeting a rough figure of 10k for parts and conversion costs..
dont believe people when they tell you it will only set you back a few thousand

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Oct 27, 2009 11:00 pm 
QLD Cruise Moderator
Offline

Age: 58

Posts: 407

Joined: 20th Jul 2009

Gallery: 1 images

Ride: EF Ford Falcon Wagon

Location: Atkinsons Dam an hour out of Brisbane
QLD, Australia

and if you step upto a Au motor you will have less head problems
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Nov 03, 2009 1:50 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1775

Joined: 10th Jul 2007

Gallery: 8 images

Ride: BFII Turbo

Power: 253 rwkw

Location: Waurn Ponds
VIC, Australia

the au's can get 10-15kws on average just with a flash tune, motor left stock, thanks to ford giving them an overly economy biased factory tune.

The rev nicer thanks to a (very slightly) longer rod/stroke ratio, which multiplies itself if you throw in a top end cam.

 

_________________

enough isn't enough

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Nov 03, 2009 6:07 am 
Parts Gopher
Offline

Posts: 64

Joined: 28th Oct 2007

Gallery: 1 images

Ride: XF ute

Location: Oakdale
NSW, Australia

thanks guys for your input.i really wanted a dohc but cost is the main factor.by the sounds of it the au is a really good motor with a stronger bottom end and higher comp ,it`s perfect for a mild cam and ecu tweak.should i use my ef harness & ecm or go the au ecm.thanks, oh btw spotted a au engine on ebay $99. starting bid
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Nov 03, 2009 7:38 am 
QLD Cruise Moderator
Offline

Age: 58

Posts: 407

Joined: 20th Jul 2009

Gallery: 1 images

Ride: EF Ford Falcon Wagon

Location: Atkinsons Dam an hour out of Brisbane
QLD, Australia

Use the Ef manifold with its wiring harness but you can use the AU injectors and Au throtle body on the ef manifold and yes AU engines are really cheap and can find a bargain on ebay.
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Nov 03, 2009 10:56 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3737

Joined: 22nd May 2006

Ride: BF F6 Tornado - #0077

Location: Bendigo
VIC, Australia

au head = limited options for cam swaps

 

_________________

** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html

F6 Tornado 2006 Build

Is it about sex? The engine in my car? Or a cure for cancer?
No?

Then f**k off

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Tue Nov 03, 2009 11:43 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1775

Joined: 10th Jul 2007

Gallery: 8 images

Ride: BFII Turbo

Power: 253 rwkw

Location: Waurn Ponds
VIC, Australia

orly?









Dude, theres heaps of choices... Wagget, surecam, JMM, wade, tighe, crow just from the top of my limited knowledge, all do au cams, and perform varying degrees better than stock.

Any cam shop worth its salt can adapt its e series profiles to an au camshaft if thats your bag.

 

_________________

enough isn't enough

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Wed Nov 04, 2009 7:29 pm 
Getting Side Ways
Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

fiftyone wrote:
au head = limited options for cam swaps


and if your so worried about that, why not just chuck the ef rocker assembly in? not much extra work involved when changing to an aftermarket cam..
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Wed Nov 04, 2009 7:57 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

fiftyone wrote:
au head = limited options for cam swaps


actually its time to disagree with that.. wade cams,camtech,crow cams and cms all do the e series equivilent cams for au....
i just got the 1673 equivilent for the au.(au1645)..
Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Wed Nov 04, 2009 8:44 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 4316

Joined: 30th Oct 2006

Gallery: 18 images

Ride: Envi EF

Location: Grafton
NSW, Australia

fiftyone wrote:
au head = limited options for cam swaps


VCT heads yes, every other AU head, no.

 

_________________

>>>EF Futura T build<<<

Top
 Profile  
 
 
 Post subject: Re: torque ratings on i6 ef el & au
Posted: Wed Nov 04, 2009 8:48 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 3737

Joined: 22nd May 2006

Ride: BF F6 Tornado - #0077

Location: Bendigo
VIC, Australia

FORDom wrote:
fiftyone wrote:
au head = limited options for cam swaps


and if your so worried about that, why not just chuck the ef rocker assembly in? not much extra work involved when changing to an aftermarket cam..


now the other posts i've been quoted in i've let slide as i havent fully researched the options avalible, but im not sure of this at all. i've HEARD of it being done. also saw a thread not long back saying a guy bent every valve in the head putting the different rockers in.

 

_________________

** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html

F6 Tornado 2006 Build

Is it about sex? The engine in my car? Or a cure for cancer?
No?

Then f**k off

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 27 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 9:13 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names