Fordmods Logo

Were to buy a Cam? 

 

Page 1 of 2 [ 16 posts ] Go to page 1, 2  Next

 
 Post subject: Were to buy a Cam?
Posted: Mon Dec 26, 2011 10:50 am 
Getting Side Ways
Offline

Age: 29

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

Hey guys

Im looking at getting a 977B cam just wanting to know if you guys have any reccomendations on where to get one?

Thanks
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 10:54 am 
Getting Side Ways
Offline

Age: 26

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia

From wade cams, pretty sure they are a site sponsor.
What else have you done to you're motor, if nothing I wouldn't be getting that particular cam.
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 10:56 am 
Getting Side Ways
Offline

Age: 26

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia

Actually I don't think they are, but there's a thread with contacts in it somewhere, search it up.
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 11:02 am 
Getting Side Ways
Offline

Age: 25

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

Here's the cam specs thread have a read through it.

ford-4l-and-6-cylinder-f1/6cyl-cams-spec-list-t57092.html

Give wade a call they used to be site sponsors but not any more not sure why. But give them a call and give crow cams a call they are in campbellfield Victoria.

Cheers Daniel

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 11:05 am 
Technical Contributor
Offline

Age: 60

Posts: 6817

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

wtbdlltd wrote:
Hey guys

Im looking at getting a 977B cam just wanting to know if you guys have any reccomendations on where to get one?

Thanks

Contact CMS and grab a Stage 2A Cam, also good idea to gear a vernier gear as well.
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 11:26 am 
Getting Side Ways
Offline

Age: 25

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

SWC wrote:
wtbdlltd wrote:
Hey guys

Im looking at getting a 977B cam just wanting to know if you guys have any reccomendations on where to get one?

Thanks

Contact CMS and grab a Stage 2A Cam, also good idea to gear a vernier gear as well.


Do the vernier ears actually make a difference mate??

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 11:40 am 
Getting Side Ways
Offline

Age: 26

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia

I'm wondering about the gear to, I'm tuning cam and chip, wouldn't mind a touch more go.
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 1:51 pm 
Technical Contributor
Offline

Age: 60

Posts: 6817

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Yes they do, with the CMS Stage 2 you preset at 2deg. Allows you to get the best from your cam.
Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Mon Dec 26, 2011 11:50 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 415

Joined: 13th Nov 2010

Ride: 95 EF GLI

Location: Melbourne
VIC, Australia

im running a 977b cam, i wouldnt recomend it on a stock computer, big difference with a proper tune, exhaust and extractors though

 

_________________

95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Tue Dec 27, 2011 12:48 pm 
Getting Side Ways
Offline

Age: 25

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

Chargd wrote:
im running a 977b cam, i wouldnt recomend it on a stock computer, big difference with a proper tune, exhaust and extractors though


What about running it with a j3??

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Tue Dec 27, 2011 2:10 pm 
Getting Side Ways
Offline
User avatar

Age: 25

Posts: 3355

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

I had a 977b @ 114, idles smoother than 112.
It was ground for a auto and I didn't know when I brought it.
But it ran fine in my manual xr6 .
I made 157rwkw with it and old press bend extractors lol

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Tue Dec 27, 2011 2:14 pm 
Getting Side Ways
Offline

Age: 25

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

ef_falcon_95 wrote:
I had a 977b @ 114, idles smoother than 112.
It was ground for a auto and I didn't know when I brought it.
But it ran fine in my manual xr6 .
I made 157rwkw with it and old press bend extractors lol


Did you have it tuned Corey?

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Tue Dec 27, 2011 2:18 pm 
Getting Side Ways
Offline
User avatar

Age: 25

Posts: 3355

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Forgot to mention that ,

Nahh no tuning , all on stock Ecu. With au injectors , after 500km the Ecu learnt to run with the 977b.

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Wed Dec 28, 2011 2:13 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 415

Joined: 13th Nov 2010

Ride: 95 EF GLI

Location: Melbourne
VIC, Australia

wild-el wrote:
Chargd wrote:
im running a 977b cam, i wouldnt recomend it on a stock computer, big difference with a proper tune, exhaust and extractors though


What about running it with a j3??


thats next on the list, it runs good, i dont get much of a lumpy sound though, im running a tickford ecu atm, idle isnt good though

 

_________________

95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels

Top
 Profile  
 
 
 Post subject: Re: Were to buy a Cam?
Posted: Thu Dec 29, 2011 11:00 pm 
Getting Side Ways
Offline

Age: 29

Posts: 546

Joined: 5th Jun 2010

Ride: BA XT, NCII V8

Location: Adelaide
SA, Australia

Motor is stock atm but exhaust and extractors will be going on before a cam.

iv been told that the 977b will run ok with exhaust and extractors but recommended tickford or equal valvle springs.

Mainly just after a lumpy note open to any suggestions
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 16 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 12, 2017 4:49 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names