|
| moostachie |
|
||
|
hi all,
i was wondering if an AU automatic transmission will fit straight into my EL without any modifications? thanks alex |
||
| Top | |
||
| DormanAU |
|
||
|
Auto or manual? Manual no it won't, auto should with the e series bellhousing. And maybe a slight loom mod but doubt it unless its an adaptive shift one
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| moostachie |
|
||
|
my EL is an auto also and from memory it does not have the tiptronic shift thing like the BF's i have driven. so the bell housing from my EL definatly?
cheers alex |
||
| Top | |
||
| XFWAGON |
|
|||
|
AU is too long for your EL. The tail housing is about 5cm longer.
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| BenJ |
|
||
|
The AU Auto is the SAME as the E series ones. Only the AU T5 manual is longer than the E series.
Even with the AU bellhousing it can be bolted up minus two bolts at the bottom. Still plenty strong enough. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| moostachie |
|
||
|
Thankyou BenJ you seem quite defiant in your respons so im going with you, plus thats the best news ive had all day,
thankyou all for your input alex |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
benj is correct
AU auto goes into E-series using an EF/EL bellhousing the EA/EB/ED housing have a different bolt pattern |
||
| Top | |
||
| tony.martin11 |
|
||
|
and the same for EF/L onto AU's i would take it?
_________________ BANNED USER |
||
| Top | |
||
| Papa Smurf |
|
||
|
tony.martin11 wrote: and the same for EF/L onto AU's i would take it? Yes, that is so. |
||
| Top | |
||
| tony.martin11 |
|
||
|
Papa Smurf wrote: tony.martin11 wrote: and the same for EF/L onto AU's i would take it? Yes, that is so. Thats good, means that when the trans goes on the AU, i can get an ef box to stop the slow changes in between gears
_________________ BANNED USER |
||
| Top | |
||
| frd906n |
|
||
|
tony.martin11 wrote: Papa Smurf wrote: tony.martin11 wrote: and the same for EF/L onto AU's i would take it? Yes, that is so. Thats good, means that when the trans goes on the AU, i can get an ef box to stop the slow changes in between gears What do you mean by slow changes, they change the same
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| kayronamus |
|
||
|
i have an au sIII with an EF fairmont trans (4spd auto) bolted onto to it no probs at all, i just swapped over the bellhousing (using AU bellhousing), just so all the bolts were in...
_________________ kilakiza eauxr6 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 34 guests |
