Fordmods Logo

Smart Lock programming for ED 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Smart Lock programming for ED
Posted: Sat May 23, 2009 5:26 pm 
Fordmods Newbie
Offline
User avatar

Posts: 11

Joined: 25th Feb 2008

Ride: Several

Location: Pambula
NSW, Australia

G'day guys,

A mate just bought an ED and I tried to program the remote by using the guidelines set out in the resources section under EF/EL, as there wasn't any for the ED that I could see? I did the 'push demister button 3 times within 5 seconds' etc thing as described, but it didn't work? I am just wondering if there is a difference for the ED series? Any help is appreciated please.

Cheers

 

_________________

http://www.fordv8supercars.com

EF - EL - Lexus SC400 - Infiniti Q45 V8

Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Sat May 23, 2009 8:04 pm 
SA Cruise Moderator
Offline
User avatar

Age: 30

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia

Re code remote for eb

To do so turn the key to acc and within 5 seconds press the boot button 3 times.
The door locks will cycle to confirm this, then press a button on each remote u wish to code, the locks will cycle again for each remote, turn key to off and walla, remote is coded...


hope this helps

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle

Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Sat May 23, 2009 11:29 pm 
Fordmods Newbie
Offline
User avatar

Posts: 11

Joined: 25th Feb 2008

Ride: Several

Location: Pambula
NSW, Australia

Thank you! I will give it a go tomorrow when I see him. I appreciate the help!

 

_________________

http://www.fordv8supercars.com

EF - EL - Lexus SC400 - Infiniti Q45 V8

Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Wed Jun 10, 2009 2:41 am 
Getting Side Ways
Offline
User avatar

Posts: 633

Joined: 21st Nov 2008

Location: Melbourne
VIC, Australia

jonathon wrote:
Re code remote for eb

To do so turn the key to acc and within 5 seconds press the boot button 3 times.
The door locks will cycle to confirm this, then press a button on each remote u wish to code, the locks will cycle again for each remote, turn key to off and walla, remote is coded...


hope this helps


hey mate you wouldnt know why the locks wouldnt cycle when you hit the boot button 3 times? they lock and thats it.. yep key is to acc.
Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Wed Jun 10, 2009 2:24 pm 
SA Cruise Moderator
Offline
User avatar

Age: 30

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia

jaysway wrote:
jonathon wrote:
Re code remote for eb

To do so turn the key to acc and within 5 seconds press the boot button 3 times.
The door locks will cycle to confirm this, then press a button on each remote u wish to code, the locks will cycle again for each remote, turn key to off and walla, remote is coded...


hope this helps


hey mate you wouldnt know why the locks wouldnt cycle when you hit the boot button 3 times? they lock and thats it.. yep key is to acc.



when i did mine, followed the manual and when the locks are down then you press a botton on the keypad and the door locks should cycle to confirm this has worked

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle

Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Wed Jun 10, 2009 4:20 pm 
Getting Side Ways
Offline
User avatar

Posts: 633

Joined: 21st Nov 2008

Location: Melbourne
VIC, Australia

jonathon wrote:
jaysway wrote:
jonathon wrote:
Re code remote for eb

To do so turn the key to acc and within 5 seconds press the boot button 3 times.
The door locks will cycle to confirm this, then press a button on each remote u wish to code, the locks will cycle again for each remote, turn key to off and walla, remote is coded...


hope this helps


hey mate you wouldnt know why the locks wouldnt cycle when you hit the boot button 3 times? they lock and thats it.. yep key is to acc.



when i did mine, followed the manual and when the locks are down then you press a botton on the keypad and the door locks should cycle to confirm this has worked


ok when i press the button on the key pad it does nothing, the key pad light is lighting up but nothing else. key pad no good?? smartlock module no good??
Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Wed Jun 10, 2009 5:39 pm 
SA Cruise Moderator
Offline
User avatar

Age: 30

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia

could be both but dont hold me on that someone who knows more on this could probley give you more help

sorry

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle

Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Tue Jun 16, 2009 6:24 pm 
Getting Side Ways
Offline
User avatar

Posts: 633

Joined: 21st Nov 2008

Location: Melbourne
VIC, Australia

not a problem mate, anyone else have an idea?
Top
 Profile  
 
 
 Post subject: Re: Smart Lock programming for ED
Posted: Sun Jan 10, 2010 7:14 pm 
Fordmods Newbie
Offline

Age: 106

Posts: 9

Joined: 3rd May 2009

Ride: BF SR, ED XR8

Location: Broken Hill
NSW, Australia

Hi, Had the same problem in my ED wagon, found you have to lock the doors before you start the procedure described above. These forums are great, thanks all


If you can't afford a Ford, Dodge a Holden

 

_________________

If you can't afford a FORD, Dodge a Holden

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Oct 21, 2017 8:47 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names