|
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Hey guys,
I need some urgent help. I removed my ignition barrel fine, the problem that i have is that the inside part (when the key barrel goes into) rotated and popped out. Now the problem is that i cannot get the barrel back in. How do i reset this part so that i can re-insert the barrel? Basically the inside returned back to the 0 position and is now not in the I position. Thanks
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress Last edited by comhelp on Sat Apr 21, 2012 7:02 pm, edited 1 time in total. |
||
| Top | |
||
| TimmyA |
|
|||
|
Down inside is the laser and the mirrors which is the smartlock... If it falls to bits then as far as I'm aware it's over and done with... You'll be looking for a replacement barrel...
When you remove the barrel you have to be careful to not cause the inside to fall out... Yet to see one go back together and work... Unless someone else on here knows more than me? Cheer,s Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
mmmmm that does not sound good
 Can someone please confirm this? if this is the case, then i will just rip out the whole barrel and bypass it all together. Can someone please confirm?
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| TimmyA |
|
|||
|
not going in a street car?
If so I'd be doing away with the barrel where possible... The connections on the back come loose eventually and having push button ignition would be more reliable... Just need a smart lock bypass... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
yes it is a street car. That is why i want to avoid it
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| TimmyA |
|
|||
|
well don't bypass anything... Find a good second hand barrel and get two new shear bolts from ford and swap it over... Be super careful when to remove the barrel to fit the column shrouds...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
ok i think that i have got back now, now i just need to put the wiring plug back on on the rear of the barrel. Only prob is, i cant remember which way round it goes :S
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
ok update:
Got it all back together and works fine  Thanks for your help Timmy
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
The key barrel ended up dying on me this weekend
the tumblers wore out so i had to get a complete new assy but all working now
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
