|
| fordy4eva |
|
||
|
Does anyone know how much it would cost roughly to high flow my injectors for my BA XR6T? And who does them? (preferably western suburbs of melbourne) Is it cheaper then buying a new set of bigger injectors?
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
Buy new injectors...
Either VPW or eBay motors... Search for 42 Lb.. http://motors.shop.ebay.com/i.html?_fro ... rs&_sacat=
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I've got new 60lb injectors on eBay . 99c start.
http://item.mobileweb.ebay.com.au/viewi ... 4569436477
_________________ El XR6 Turbo |
|||
| Top | |
|||
| EFFALCONMAN |
|
||
|
Got the BF N/A Wagon booked in to get a blower fitted in a few weeks. I already have MAP sensor and rising rate regulator sorted. However the boys at BPT recommended that I also sort the fuel pump and injectors at the same time just to make sure I don't start leaning out if I get up around the 230 - 250rwkw mark (I wish).
So, just looking at a couple of things on eBay. 42 lb Injectors: http://www.ebay.com.au/itm/FUEL-INJECTO ... 2ec4cf1212 Walbro GSS340 Fuel Pump Assembly: http://www.ebay.com.au/itm/FORD-XR8-XR6 ... 416926e108 The fuel pump is for Ute only...I have the wagon. I've been trawling Google trying to find part numbers for injectors and fuel pumps for the BF Wagon, Sedan and Ute to see if there are any differences. Basically I don't want to go fork out close to $500 on parts, only to find on the day of installation that they don't fit quite right. Can anyone either point me in the right direction to find an online source of these part numbers, or those who have done fuel system upgrades to their BA/BF Wagons let me know if the wagon shares Ute or Sedan parts? Just want to get this right the first time. 
_________________ Too many Fords and too much cash "invested" over the years. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
