Fordmods Logo

ED v8 330kw project 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: ED v8 330kw project
Posted: Sun Jun 29, 2014 4:21 pm 
Stock as a Rock
Offline

Age: 24

Posts: 131

Joined: 30th Jan 2012

Ride: au sr

Location: Lara
VIC, Australia

Hi Guys,

Im very new to this v8 world.
I have just purchased a 1993 ED 5 litre to build up as a burnout comp car/bit of fun on the drag strip also.

I want a minimum of 330kw without a blower.
Is this achievable from a 5litre?
If so where and what do i do/go to to get this result.

Any help would be amazing, plan on taking to the 2015 ford day in Geelong :)

I was looking at a 347 stroker kit from BPT, any good?

 

_________________

RED AU SERIES 2 SR
XR8 INTERIOR, LED LIGHTS, XR8 CLUSTER
LOWERED, CUSTOM EXHAUST, GENIE COMP HEADERS, SRE CAM, BPR TUNED, MAGNAFLOW MUFFLER AND CAT, FRESH RESPRAY, LSD, XR6 TRANS, DRIVE SHAFT, port and polished POWER 183 RWKW

Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Sun Jun 29, 2014 4:40 pm 
Technical Contributor
Offline

Age: 60

Posts: 6817

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Are you talking 330Kw (440hp) at the flywheel or the rear wheels?
Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Sun Jun 29, 2014 4:57 pm 
Stock as a Rock
Offline

Age: 24

Posts: 131

Joined: 30th Jan 2012

Ride: au sr

Location: Lara
VIC, Australia

SWC wrote:
Are you talking 330Kw (440hp) at the flywheel or the rear wheels?



330kw engine mate,
i dont think i'd pull over 300rwkw without chucking a turbo or s/c on it

 

_________________

RED AU SERIES 2 SR
XR8 INTERIOR, LED LIGHTS, XR8 CLUSTER
LOWERED, CUSTOM EXHAUST, GENIE COMP HEADERS, SRE CAM, BPR TUNED, MAGNAFLOW MUFFLER AND CAT, FRESH RESPRAY, LSD, XR6 TRANS, DRIVE SHAFT, port and polished POWER 183 RWKW

Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Mon Jun 30, 2014 8:38 am 
Smokin em up
Offline

Age: 37

Posts: 284

Joined: 3rd Mar 2012

Ride: NL Fairlane Ghia V8

Location: Geelong
VIC, Australia

Its possible. I was just looking at a dyno graph over on the Corral.net, and with a dart blocked 363, AFR 195 heads, Trickflow R manifold, 10.8 comp, cam etc, it made 440 hp, which is basically right on 330kw.

So a good 347 would do around that. Problem is the stock block though, it probably can't handle the power and revs it would need.
Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Tue Jul 01, 2014 5:50 pm 
Stock as a Rock
Offline

Age: 24

Posts: 131

Joined: 30th Jan 2012

Ride: au sr

Location: Lara
VIC, Australia

NLGHIA5.0 wrote:
Its possible. I was just looking at a dyno graph over on the Corral.net, and with a dart blocked 363, AFR 195 heads, Trickflow R manifold, 10.8 comp, cam etc, it made 440 hp, which is basically right on 330kw.

So a good 347 would do around that. Problem is the stock block though, it probably can't handle the power and revs it would need.



What do you mean by wouldn't be able to handle it?
Would there be anything i could do to the stock block?
Looking at getting a full 347 kit includes everything i need for $1450 shipped to my door in either scat or eagle.

 

_________________

RED AU SERIES 2 SR
XR8 INTERIOR, LED LIGHTS, XR8 CLUSTER
LOWERED, CUSTOM EXHAUST, GENIE COMP HEADERS, SRE CAM, BPR TUNED, MAGNAFLOW MUFFLER AND CAT, FRESH RESPRAY, LSD, XR6 TRANS, DRIVE SHAFT, port and polished POWER 183 RWKW

Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Thu Jul 03, 2014 8:32 am 
Smokin em up
Offline

Age: 37

Posts: 284

Joined: 3rd Mar 2012

Ride: NL Fairlane Ghia V8

Location: Geelong
VIC, Australia

The stock blocks aren't real strong. Feed enough power through them, or high revs, and they will eventually split the block. They might last years, or might last weeks.

There is not much you can do to a stock block, but to help it live use ARP bolts, keep the revs down, have the crank internally zero balanced (not the 50oz? imbalance they usually have) and have a conservative tune. Or buy a Dart block and let it rip.

Or use an F4TE roller block 351W which doesn't have the same strength issues, but requires a new sump, dizzy, and only certain extractors will fit, and potential bonnet clearance issues depending on manifold.
Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Thu Jul 03, 2014 10:21 am 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

if I read it correctly hes after 330kw/440hp at the emgine..
that would be about 250ish rwkw. the stock block should be fine at 250rwkw..
Top
 Profile  
 
 
 Post subject: Re: ED v8 330kw project
Posted: Mon Sep 01, 2014 12:58 am 
Getting Side Ways
Offline
User avatar

Age: 64

Posts: 3552

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

TFS heads and induction, 10 to 1 compression , 280* cam / .550 or so lift 110/ 112 LSA.. With GOOD rods and pistons will get you there . Std crank will be ok . BUT be prepared to rev it .. Oh decent sump.. Windage tray etc..
Stroker crank ? It's best to get as close to neutral balance as you can..
With N/A the lighter / stronger the rotating parts the better it is on block ..

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 18, 2017 4:57 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names