Fordmods Logo

97 ford courier 2.6 efi 


Page 1 of 1 [ 1 post ] 

 Post subject: 97 ford courier 2.6 efi
Posted: Mon Oct 26, 2015 1:42 pm 
Fordmods Newbie

Age: 71

Posts: 1

Joined: 26th Oct 2015

Ride: ford courier

Location: Nth Ringwood
VIC, Australia

I have the above mentioned car on gas, Impco gas system.
The car has been on gas for 10 years and ran well. I recenly stopped running on gas, it starts and presumably runs on petrol then cuts out after say ten seconds.There is a unit on the firewall which clicks and it shuts down. If you switch to gas at say 40ks per hour it runs quite well. So I have assumed there is a part /valve in the system which needs to be replaced. There is a small vacuum hose on the inlet side of the aluminium doughnut type thing on the inlet manifold,if you disconnect this when it starts on petrol it keeps running , if you reconnect it it stops.My thinking is it could be this valve. I would greatly appreciate any advice. I had it to a mechanic $500 later I am no better off, they just don't have a clue, they can't even deduce which is the faulty part.
Display posts from previous:
Sort by  
 Page 1 of 1  [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Fri Apr 23, 2021 7:17 am All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names