Fordmods Logo

Project EA ( Barra DOHC Conversion ) 

 

Page 17 of 17 [ 248 posts ] Go to page Previous  1 ... 13, 14, 15, 16, 17

 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 27, 2016 8:28 pm 
Fordmods Junkie
Online
User avatar

Posts: 3930

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

barraea wrote:
johnnyeHCF wrote:
Mad2 wrote:
barraea wrote:
SWC wrote:
All is good.

If you are still considering going down the DOHC Barra build, then might be a good idea to look at buying a write off. That way you have all you need infront of you and you can sell off what you don't need to balance the budget.

Good luck with your build.


Hope I'm not hijacking but that seems best a write of ba but what's a ba falcon that's wrecked worth now a days roughly as obviously they fluctuate with demand etc



depends. just have to keep an eye out. he got he's for $400 [which is blooody amazing & perfect] where as mine was rough ie no rear brakes [removed] & damaged front panels for $300 [drives ok]. all depends so keep an eye open


You can get lucky-I paid $500 for mine (smashed in front) so some gear was damaged bad,check out Greys Online seen lots of BA's go under a grand,Johnny.


I always thought its pickles the go to place but takes a look at this site thank you



i went via ebay .... bought it just 'up the road' from me :mrgreen:
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Wed Jan 27, 2016 8:36 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

ohhh yea, I might have my hands on a ba xr6 for $400. best i found so far.. front end smashed,
only thing that broke was the idler pully. getting close to doing my mod now. just got to get it home.
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Sat Jan 30, 2016 9:49 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

sup guys. I got my ba falcon the other day, cleaned out all the broken stuff in the engine bay.
I was just wondering how the forums work. How do i make my own thead thingy?
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Sat Jan 30, 2016 9:50 pm 
Getting Side Ways
Offline

Age: 44

Posts: 403

Joined: 2nd Jan 2016

Ride: eb ford falcon ghia

Location: Sydney
NSW, Australia

sup guys. I got my ba falcon the other day, cleaned out all the broken stuff in the engine bay.
I was just wondering how the forums work. How do i make my own thead thingy?
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Sat Jan 30, 2016 10:35 pm 
Fordmods Junkie
Online
User avatar

Posts: 3930

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Fri Jul 08, 2016 12:01 pm 
Smokin em up
Offline
User avatar

Age: 27

Posts: 233

Joined: 2nd Sep 2013

Ride: 1988 5spd DOHC EA Falcon S

Location: ACT
NSW, Australia

Hey everyone,

So after finishing the turbo conversion I haven't posted much as of late, and this may well be my last post. Perhaps a regretful sale, my falcon is going to be.

I'm only asking 4K For the turbo barra swapped EA:

Owned since 1997. Stored in 2000 and was removed from storage in 2014. Car is registered although not engineered. Specs: Barra engine with 215xxx kms.Turbo is near new with 2000 kms, has braided oil feed with block filters removed. The conversion uses the factory BA PCM, 4 speed with PATS disabled. Front mount intercooler with reversed piped that run along chassis rail (600 x 300). Full 3 inch exhaust with hi flow cat. Diff is a 2.92 open. Has slotted DBAs on the front standard disc on the read. Chassis has 250xxx. Needs bushes, limited slip diff and some minor touch ups. The car is a sleeper and sits slightly lowered on XR6 suspension with snowflakes.

Image
Image
Image
Image

Located in ACT, car is driveable ( IT IS NOT ENGINEERED ) If you're after more information or want to text me, PM me first.

 

_________________

Rolling around with a Barra 182 - equipped 1988 EA falcon

http://www.fordmods.com/the-garage-f53/ ... 27639.html

Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Sat Jul 09, 2016 12:12 pm 
Fordmods Junkie
Online
User avatar

Posts: 3930

Joined: 22nd Jan 2009

Ride: '03 BA & '06 BF Wagooons

Location: Geeelong
VIC, Australia

GrannyFalcon82 wrote:
Hey everyone,

So after finishing the turbo conversion I haven't posted much as of late, and this may well be my last post. Perhaps a regretful sale, my falcon is going to be.

I'm only asking 4K For the turbo barra swapped EA:

Owned since 1997. Stored in 2000 and was removed from storage in 2014. Car is registered although not engineered. Specs: Barra engine with 215xxx kms.Turbo is near new with 2000 kms, has braided oil feed with block filters removed. The conversion uses the factory BA PCM, 4 speed with PATS disabled. Front mount intercooler with reversed piped that run along chassis rail (600 x 300). Full 3 inch exhaust with hi flow cat. Diff is a 2.92 open. Has slotted DBAs on the front standard disc on the read. Chassis has 250xxx. Needs bushes, limited slip diff and some minor touch ups. The car is a sleeper and sits slightly lowered on XR6 suspension with snowflakes.


Image
Image

Located in ACT, car is driveable ( IT IS NOT ENGINEERED ) If you're after more information or want to text me, PM me first.



sorry to hear that mate :(
Top
 Profile  
 
 
 Post subject: Re: Project EA ( Barra DOHC Conversion )
Posted: Mon Jul 18, 2016 2:25 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 880

Joined: 16th May 2012

Gallery: 16 images

Ride: EF-XR6/XG-6/XE-V8- project

Hey Bayden,nice work mate -shame to have to sell but someone is going to get an awesome EA + you've kept another E-series on the road well done

 

_________________

XG DOHC-BARRA 182/Turbo kit/20% Underdrive and BA 4-SPEED + Tiptronic shifter

https://youtube.com/channel/UCaRUQ10of3FlOuSpvfapOtA

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 17 of 17  [ 248 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Apr 24, 2024 9:57 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names