|
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Does anyone know how to remove the clock from the middle facia panel as the light no longer works and light bulb needs replacing.
Does anyone know what wattage these bulbs are? Thanks |
||
| Top | |
||
| Mad2 |
|
|||
|
Hi,
if I remember correctly .... you need to remove the radio so you can get to the screws behind it & remove the whole facia piece. the clock is then unscrewed from the facia. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
G'day Mad2,
Thanks, I'll have to go back to Autobarn for them to remove the new radio / CD player to gain access. The original Ford radio / cd player was removed as it did not support mp3 music files. |
||
| Top | |
||
| Mad2 |
|
|||
|
took some pics so you know what to do . . . .
had me controls play up for the fan, so grabbed another. there are 4 screws to undo. two are behind the ashtray & other two are to either side of the radio. then there are a few clips holding the rest in. ashtray  this shows you there upper left screw mount  this shows you there upper right screw mount  clips etc    so four screws [phillips head] & seven clips hope that helps ya out 
|
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Hi Mad2,
It does help abit thanks. Trying to figure out in removing the CD / Radio player is the puzzle before I can tackle removing the panel. What wattage is the light? Would Jaycar stock these or does it need to be genuine Ford? |
||
| Top | |
||
| Mad2 |
|
|||
|
bondy99 wrote: Hi Mad2, It does help abit thanks. Trying to figure out in removing the CD / Radio player is the puzzle before I can tackle removing the panel. What wattage is the light? Would Jaycar stock these or does it need to be genuine Ford? got no idea what the wattage is ... won't be much. put up a pic of the radio/surround. I know with the one in yello peril.. pull out the 'tray' under the radio & remove the plastic trim piece around said radio to get too it. re globe - any place that sells automotive stuff should sell em. |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Mad2,
I'll take a photo some time tomorrow of the surround and will post here, probably in the evening. |
||
| Top | |
||
| Mad2 |
|
|||
|
||||
| Top | |
|||
| bondy99 |
|
||||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
G'day Mad 2
Here's the pic of centre console. I could only locate 2 screws, they were underneath the cigarette tray. Autobahn fitted the Radio / CD Unit, they made a case to suit the Radio / CD unit. Bit puzzled as to how to remove that radio. Maybe I need to take the car back to Autobarn to remove the Radio unit.
|
||||
| Top | |
||||
| Mad2 |
|
|||
|
need to remove the trim around the radio without breaking it. i'm presuming the radio slides in to a cradle.
|
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Mad2,
Oh ok, Might be tricky trying to remove that cradle. I'll give it a go sometime this week. Starting to get thoe hot and muggy days again where I am. |
||
| Top | |
||
| Mad2 |
|
|||
|
bondy99 wrote: G'day Mad 2 Here's the pic of centre console.  I could only locate 2 screws, they were underneath the cigarette tray. Autobahn fitted the Radio / CD Unit, they made a case to suit the Radio / CD unit. Bit puzzled as to how to remove that radio. Maybe I need to take the car back to Autobarn to remove the Radio unit. with the 'tray' under the radio ... is it held via a screw? |
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
I'll have a closer look tomorrow and see what I can find.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
