Fordmods Logo

Another Box Project 

 

Page 9 of 9 [ 130 posts ] Go to page Previous  1 ... 5, 6, 7, 8, 9

 
 Post subject: Re: Another Box Project
Posted: Sun Nov 04, 2018 3:28 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Mad2 wrote:
have been working [sorta] on the BF/EB. BF has had all seats removed as well as door trims, carpet & parts of the dash. will be using the BA door trims etc from the BA parts car. EB has had same done, and will be using EF/NF door trims & seats with EL rear cargo are items.


TROY. wrote:
i just conected the power window wires up to the el switch..

if anyone is interested in how the wires are conected..(for those who are considering doing this mod)i took some pics..

Image

i was thinkin i would have to do this mod . . . . then i was looking for some items .... then found this! :lol: :roll:

Image

have removed tape wrapped around it & will heat shrink joins etc properly.

Cheers




and redone. there was a cupla heatshrinks on it, but the rest were just taped up. just need to grab some non-adhesive pvc tape & re-bandage it.

Image

depending on how well the connects up & sits with the door trim back on, i may or may not redo wiring length. seems ok without trim there
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Tue Nov 06, 2018 11:49 am 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Tapped & fitted- currently without trims fitted

Image

Image


look i will be going for

Image

Image


NF seats & door trims to be fitted from donor with doors modified for armrest mounts screws using Snap's suggestion. will be modifying front floor for the one mounting spot & modifying rear of seat rail & fitting a EA/ED mount.


Image

most of it sitting in the back

Image


NF parts car.

Image


and in case your wondering .... yes i would love to fit the EL handbrake.... but i don't want the EL console! ......... not yet any way lol

have the NF interior light & loom. loom is yet to be modified with sections from [i think?] an AU1 Fairmont. pics another time.

how hard is it to change the engines front crank seal?
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Sat Dec 01, 2018 9:07 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

anyone able to tell what differances there are between the EB2 'S' & EB2 Fairmont dash looms are :?: as i'm currently leaning towards changing dashes due to marks on the Fairmont unit. they both have the dash tweeters & same cluster. the only differances i've noticed are the heater/aircon controls & the 'S' has a relay roughly where the handbrake is.


Thanks :roll:
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Sat Dec 15, 2018 10:43 am 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Hi all.
can anyone tell me what temp sender i should be using to control thermo fans? ... currently thinking of 95C on & 90c off temp sender. thanks
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Mon Dec 24, 2018 4:28 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Mad2 wrote:
Hi all.
can anyone tell me what temp sender i should be using to control thermo fans? ... currently thinking of 95C on & 90c off temp sender. thanks




anyone give me an idea of what :?: :?:



pulling a parts car apart and found this.

drivers side

Image

passenger side is not quite as bad ... but! it does have the same/similar foam that was used to "stick" driver's rear window in place :shock: and does move up top, but not as much :roll: :?

explains ALL the water that was coming in :cry:

saw next..............
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Mon Dec 24, 2018 10:58 pm 
Getting Side Ways
Offline

Age: 66

Posts: 3573

Joined: 11th Jan 2009

Location: Smithfield
NSW, Australia

EL sender? 6810428 Genuine number but I am sure you can find a used or replacement?
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Tue Dec 25, 2018 9:47 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Papa Smurf wrote:
EL sender? 6810428 Genuine number but I am sure you can find a used or replacement?



as in what temperature range do i need/want for the operation of the fans :?:
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Sat Dec 29, 2018 12:09 am 
Getting Side Ways
Offline

Age: 66

Posts: 3573

Joined: 11th Jan 2009

Location: Smithfield
NSW, Australia

That one is the factory EL/AU one for the thermo fans and for many other Fords. I believe it is 95c?
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Sat Dec 29, 2018 9:36 am 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Papa Smurf wrote:
That one is the factory EL/AU one for the thermo fans and for many other Fords. I believe it is 95c?



ahhh gotcha Papa. :mrgreen:
Top
 Profile  
 
 
 Post subject: Re: Another Box Project
Posted: Tue Jan 01, 2019 10:21 am 
Fordmods Junkie
Offline
User avatar

Posts: 3107

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Good morning all .. Happy New Year and all :lol:


just a quicky.... is the item in the pics an original part from a EA?. think the doors came from a '89 Fairmont Ghia 3sp

Image

Image


Image

Cheers
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 9 of 9  [ 130 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Jun 17, 2019 10:13 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names