Fordmods Logo

How On Earth Do You Remove The EL Ignition Coil :( 

 

Page 2 of 2 [ 23 posts ] Go to page Previous  1, 2

 
Posted: Sat Jun 17, 2006 5:20 pm 
Getting Side Ways
Offline

Age: 36

Posts: 4609

Joined: 29th Jul 2005

Gallery: 10 images

Ride: BOXCAR

Location: Launceston
TAS, Australia

EDMONTY wrote:
they usually just die with out warning mate ,theres no symtoms


well i pulled the high tension lead from the coil to the dissy and chucked a plug on to the end of it and earthed the plug, then got a mate to turn the engine over and the spark was piss weak, but still a little bit there

 

_________________

^^^ What He Said

<a href="http://www.fordmods.com/forums/viewtopic.php?t=44952" target="_blank" class="postlink"> TAS Cruises</a>

Top
 Profile  
 
 
Posted: Sat Jun 17, 2006 5:22 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia

just get a new one mate there like $30 i think i have 2 spare here

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42

Top
 Profile  
 
 
Posted: Sat Jun 17, 2006 5:28 pm 
Getting Side Ways
Offline

Age: 36

Posts: 4609

Joined: 29th Jul 2005

Gallery: 10 images

Ride: BOXCAR

Location: Launceston
TAS, Australia

yep thats what i am doing, i pulled it off and checked the resistances of it and compared them to the specs in my gregorys, the resistances of the coil seems to be a bit out.

Its a bosch one, does that mean the original has been replaced? (i thought they were motorcraft ones)

 

_________________

^^^ What He Said

<a href="http://www.fordmods.com/forums/viewtopic.php?t=44952" target="_blank" class="postlink"> TAS Cruises</a>

Top
 Profile  
 
 
Posted: Sat Jun 17, 2006 5:30 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia

nah i think there bosch ,just get another bosch one there good

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42

Top
 Profile  
 
 
Posted: Sat Jun 17, 2006 7:02 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 42

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

EDMONTY wrote:
they usually just die with out warning mate ,theres no symtoms


Had a mate loose his, pulling into a wash bay at carlovers. Engine died as pulled in, and wouldn't restart.

I've replaced mine completely with a crane multispark ignition system.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
Posted: Sat Jun 17, 2006 7:14 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia

yeah i lost mine just driving along the rd wasnt happy just stopped dead

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42

Top
 Profile  
 
 
Posted: Mon Jul 03, 2006 8:37 pm 
Getting Side Ways
Offline

Age: 40

Posts: 756

Joined: 21st Nov 2005

Gallery: 25 images

Ride: 1999 AU futura

Location: griffith
NSW, Australia

If your car isnt lowered you can actually reach under and unplug your old coil and just replug your new coil up and move your car for easier refitment of new coil.There is 2 i think 8 or 6mm bolts which hold the bracket of the coil to the block.Just use a quarter drive ratchet and and small extension with your socket.Doesnt take long to fit.

 

_________________

COMING SOON,XD WITH A TURBO...CLEVO STYLE

Top
 Profile  
 
 
 Post subject: Re: How On Earth Do You Remove The EL Ignition Coil :(
Posted: Mon Oct 14, 2019 5:30 pm 
Fordmods Newbie
Offline

Age: 53

Posts: 10

Joined: 21st Mar 2016

Ride: Falcon EL

Location: Flagstaff Hill
SA, Australia

I realize you've probably already done the job, but this is just for anyone reading this post for the first time.
I've just finished replacing the coil on my EL and it was NOT easy, mainly because of limited access and visibility.

1)Only access is from under the vehicle, on jack stands.
2) Disconnect the large blue plug from the coil by simply squeezing on the wire spring and pull away from the coil. (should come off very easily)
3) Disconnect the wire from the blade terminal which is also attached to the coil.
4) 8mm 1/4 drive socket with short extension bar (no longer than the ratchet itself) and remove top bolt. (you can't actually see the top bolt). Best to fit the socket & extension onto the bolt, then add the ratchet after. (very little room to move as you'll soon see).
5) 10mm 1/4 drive socket to remove bottom bolt. (i don't know why the top & bottom bolts are different sizes, but they are) Remove the old coil.
Now the fun part.......Re-installing......putting the top bolt in while handling the new loose coil.
6) Before you get back under the car, place the 8mm bolt in the socket and tape it into the socket with just a little masking tape so it doesn't fall out every 4 seconds.
7) Fit the lower 10mm bolt first but only finger tight.
8) Screw in the top 8mm bolt by hand using only the socket and extension. (the masking tape will save you swearing profusely every time the bolt falls between the trans mount bracket and engine sump).
9) Then using your ratchet tighten both bolts neatly.
The rest........is easy.
Ford certainly weren't thinking of you and me when they designed the location of the ignition system....That's for sure!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 23 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 8:54 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names