Fordmods Logo

XG Running on 3 cylinders 

 

Page 1 of 1 [ 2 posts ] 

 
 Post subject: XG Running on 3 cylinders
Posted: Sat Dec 21, 2019 5:30 pm 
Fordmods Newbie
Offline

Posts: 1

Joined: 25th Oct 2018

Location: Wagga Wagga
NSW, Australia

Hey all.

Recently I swapped an XG engine into my XF sedan and for some reason the engine is only firing on cylinders 2, 4 and 6. The engine was running fine and smooth in the XG that it came out of, and was running fine in the XF for a day or so. Then the next day I ran it for about 1/2 hour, parked it for 2 and when I went to start it again cylinders 1, 5 and 3 wouldn't fire. Each of these cylinders is getting a strong spark and whenever I pull the plugs they are wet with fuel, keep in mind that the engine still runs, just with fuel and smoke pouring out of the exhaust. I'll list what I've done to try and rectify the issue below but I'm not sure what could've caused this to happen in the space of the 2 hours that it was parked.

What's been done to try and fix it:
- New plugs ( twice )
- New leads
- New coil
- New fuel filter
- ECU swapped for one that I know works
- New fuel pump ( had one anyway )

Thanks in advance for any help, regards.
Top
 Profile  
 
 
 Post subject: Re: XG Running on 3 cylinders
Posted: Wed Jan 01, 2020 8:08 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1348

Joined: 21st Dec 2004

Gallery: 40 images

Ride: EF GLi/Ghia bitsa

Location: Melbourne
VIC, Australia

Have a really good look at the distributor cap, sometimes they can crack, or have some tracking/damage that's hard to see, I'd actually remove the distributor cap and have a really good look at it. Other than that, if it's a DEAD miss on 3 cylinders, you are obviously MISSING something, don't be a parts changer, do some TESTS; Do you have INJECTOR PULSE? if not, check the fuel injectors (but then again, being as the plugs are wet, you most likely do have an injector pulse, but check it anyway) Also it won't hurt to have a look under the rocker cover to make sure the valves are opening and closing properly, do a compression test.

There's a few things to start with for now, hope that helps.

Gab
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 02, 2020 4:34 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names