I want to disconnect the LPG and just run my EF Falcon on fuel. Just want to know the process for doing this.

umm ... only thing that comes to mind for the start ...... turn LPG tank off with the hand valve & go for a drive. it will eventually run out & then you can remove the piece in the intake. or you could just run the tank till it's empty so it's easy to lift out [believe me you don't want much in the tank] when it shows empty or close to it. i leave the fill pipe connected to the tank just so i don't have any leakage [don't know if it's safe to remove fill line with LPG still in tank?]. be extremely careful when cutting the wiring as you do not want to cut the wrong wire & you may/may not have a wire cut already - will need to workout where it goes if there is otherwise car may not run, so just watch what your doing. repair/fill in all holes in boot floor & any other holes made for the LPG system.


something like that ..... i think?


Ps. is it injected or ?