|
| Rapier |
|
||
|
dcstraight wrote: joolz wrote: the funny screws your talking about are torque screws Just to be anal, they're torx screws  dont mind dcstraight hes got his rags atm 
just do what i did and drill the f**k out lol |
||
| Top | |
||
| Bassfreak55 |
|
||
|
Lol, if i wasnt so unco with power tools, ie. a drill, then i would have drilled the f**k*rs out aswell.. But my luck id slip and drill right through the dash of sumfin, then i'd be real p****d ay! lol
Rags? Meh, im used to rag related issues -> live with my girlfriend 
|
||
| Top | |
||
| Interceptor |
|
||
|
the specs on the HU look good, but personally for the $$ i would've gone for the 8450
_________________ Banned |
||
| Top | |
||
| Thomas |
|
|||
|
Bassfreak55 wrote: Bugger! ..Have to wait 'til tomorrow then
No you don't!! Go grab your self grip on pliers tighten them on and twist, should come off pretty easy took me roughly 15 minutes as i am a very impatient bloke, who likes to get things done straight away what ever the cost or sacrifice.
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| joolz |
|
|||
|
so many butchers in this world, bet some of their toolboxes conscist of only a hammer, cold chisel, vice grips and band aids.......
|
|||
| Top | |
|||
| Rapier |
|
||
|
Bassfreak55 wrote: Lol, if i wasnt so unco with power tools, ie. a drill, then i would have drilled the f**k*rs out aswell.. But my luck id slip and drill right through the dash of sumfin, then i'd be real p****d ay! lol
Rags? Meh, im used to rag related issues -> live with my girlfriend lol just start with low speed cordless then use a high speed 240v jobby works a treat |
||
| Top | |
||
| Bassfreak55 |
|
||
|
All done! ..I gave up doin it myself (too many wires to fiddle with!) ..Only paid $50 to get it installed.. Works great! Now all i need are some decent speakers to replace those 'tinny' stock ones
Any recommendations on what speakers to use? What are the biggest sized speakers that will mount to the front and back of the car (el xr8).. Also, Interceptor, I only payed $530 for the P1Y deck, cheaper than the 8450, courtesy of ebay! Does that change ur opinion? lol
|
||
| Top | |
||
| Thomas |
|
|||
|
You can get 6' upfront and 6x9's at the back (but you will need spacers if you wish no to cut into your parcel shelf) This combination is probably the best as you get both low and high frequency notes. Unless you want to get 6' all round and a sub in the boot amplified this will be better. But when it comes down to it it's all about your needs.
Hope ive helped a bit.
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| Bassfreak55 |
|
||
|
Yeh i think ill go for the 6's all round option as i would like to get a sub in the boot.. The question is though, what are some good quality 6's?
Also, how deep can 6's in the fron door pod be before obstructing something? |
||
| Top | |
||
| stuzzy |
|
|||
|
i put the pioneer speakeers n my front door the bullet ones the model b4 the yellow range of speakers they were a bit bigger than standard depth but went in fine and went straight into standard holes
|
|||
| Top | |
|||
| haggis |
|
|||
|
If you don't mind me asking, which vendor did you buy it from? I'm in the market now for something similar and im looking at spending a similar amount. Hopefully i can do as well as you have.
_________________ I can see through wooden doors. |
|||
| Top | |
|||
| Tomek |
|
||
|
joolz wrote: so many butchers in this world, bet some of their toolboxes conscist of only a hammer, cold chisel, vice grips and band aids.......
Well i know snow whites consists of at least a box cutting nife, and watever he said before... |
||
| Top | |
||
| Thomas |
|
|||
|
Bassfreak55 wrote: The question is though, what are some good quality 6's?
I don't care what any one else says, if you have the money go straight for "cadence" if anyone has heard this audio brand then they will know that they kick a**, I mean my mate has 4' splits in th front of his car and he tells me there better then his pioneer 6' in the back. Trust me and i believe him crystal clear sounds. 
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| Bassfreak55 |
|
||
|
haggis wrote: If you don't mind me asking, which vendor did you buy it from? I'm in the market now for something similar and im looking at spending a similar amount. Hopefully i can do as well as you have.
Have a look at "wesell_4less"'s products on ebay in the car audio section and he'll have a few decks you can choose from for heaps cheap.. Thats who i got mine off by the way.. |
||
| Top | |
||
| haggis |
|
|||
|
cheers mate
_________________ I can see through wooden doors. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
