Fordmods Logo

rear springs 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: rear springs
Posted: Mon Nov 22, 2004 12:58 am 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1939

Joined: 10th Nov 2004

Gallery: 31 images

Ride: G6E TURBO

Location: THE DRUITT
NSW, Australia

are thre any diffrences betwwen 6 & v8 rear sprins as mine r cut & car sits 2 low thinkin of going 2 pick & payless & pulling a set out

 

_________________

MEMBER 1390

Top
 Profile  
 
 
Posted: Mon Nov 22, 2004 6:52 am 
Getting Side Ways
Offline

Age: 42

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

afaik the rear springs are the same for I6 and V8

 

_________________

Banned

Top
 Profile  
 
 
Posted: Mon Nov 22, 2004 4:42 pm 
Fordmods Newbie
Offline

Age: 39

Posts: 2

Joined: 11th Nov 2004

Ride: vr clubsport

Location: melb
VIC, Australia

only fronts are different

 

_________________

the user previusly known as ajax_666

Top
 Profile  
 
 
Posted: Wed Nov 24, 2004 5:59 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

get them from an spack or xr if your gonna use wrecker parts, kings would be better, $140pr in our town dude
Top
 Profile  
 
 
Posted: Sun Nov 28, 2004 9:32 pm 
Smokin em up
Offline
User avatar

Age: 38

Posts: 297

Joined: 5th Nov 2004

Ride: 410 Cube FE LTD

Location: Canberra
ACT, Australia

i installed a set of pedders lowered springs in a mate of mines car, and they seemed really good aswell? how do they compare with kingsprings? at the end of the day, the car handled and looked nice aswell
Top
 Profile  
 
 
Posted: Sun Nov 28, 2004 9:37 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

I have king supa lows, but i dont like them, too soft
Top
 Profile  
 
 
Posted: Tue Nov 30, 2004 7:10 pm 
Getting Side Ways
Offline
User avatar

Age: 49

Posts: 695

Joined: 5th Nov 2004

Gallery: 7 images

Ride: 2008 WQ Fiesta XR4

Location: Adelaide.
SA, Australia

You can also get King superlow-heavy duty for the rear of the E series Fords, but these WILL require a short shocker to hold them in.

 

_________________

2008 WQ Fiesta XR4
2007 LS Focus CL

Top
 Profile  
 
 
Posted: Tue Nov 30, 2004 7:34 pm 
Getting Side Ways
Offline
User avatar

Age: 70

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

CHEF wrote:
I have king supa lows, but i dont like them, too soft

Try some decent shocks, you'll be surprised!!!

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Tue Nov 30, 2004 10:13 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

Yeah I know, got bilsteins in my other car and id love to put them in this too.
Accually I was at wakefield on monday and it was cornering alot better than I expected, so they're not too bad... not great but not bad either
Top
 Profile  
 
 
 Post subject: how did ya go?
Posted: Tue Nov 30, 2004 11:19 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1939

Joined: 10th Nov 2004

Gallery: 31 images

Ride: G6E TURBO

Location: THE DRUITT
NSW, Australia

lap times,car sweet? :lol:

 

_________________

MEMBER 1390

Top
 Profile  
 
 
Posted: Wed Dec 01, 2004 1:56 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

1:19 was the best i managed so Im happy with that. The car ran very well only drama was a small water leek from a heater hose.
It was neck and neck with a EF XR6 (stock other than extractors, suspension), through most corners and dead even down the straight, though he pulled out of the slower corners slightly quicker due to his being manual, mine auto.
Very happy... just needs more power!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 4:31 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names