Fordmods Logo

interior lighting 

 

Page 2 of 2 [ 25 posts ] Go to page Previous  1, 2

 
Posted: Mon Nov 15, 2004 11:08 pm 
Smokin em up
Offline

Age: 37

Posts: 203

Joined: 5th Nov 2004

Ride: laser tx3

Location: Toogoolawah
QLD, Australia

but if i did this with my escort it would get called rice

 

_________________

neva there in a ford corsair/nissan pintara

Beefcake Industries presents, the one the only *BEEFTUS ESCORT*

Proud member of fordmods no. 149

Top
 Profile  
 
 
Posted: Tue Nov 16, 2004 12:52 am 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 2450

Joined: 5th Nov 2004

Gallery: 1 images

Ride: NL V8 Fairlane

Location: Sydney
NSW, Australia

For the dome light you need a coned LED. A normal one will work fine for reading lights..

 

_________________

There are 10 types of people in this world.
Those who know binary and those who don't.

Top
 Profile  
 
 
Posted: Tue Nov 16, 2004 4:04 pm 
Smokin em up
Offline
User avatar

Age: 46

Posts: 254

Joined: 6th Nov 2004

Gallery: 4 images

Ride: NA Series II Fairlane Sportsman

Location: Surrey Downs
SA, Australia

voxace, you can get LED globes already made up for the dome light for your vehicle. They look just like the glass fuse type globe, but have the little circuit board inside the glass with four LED's on it. Gave out a good spread of light as well, considering it iwas blue.

 

_________________

1990 NAII Fairlane Sportsman
194,000 kms
MP3, HID, LPG, and a few other 3 letter abbreviations too.

Top
 Profile  
 
 
Posted: Tue Nov 16, 2004 9:37 pm 
Getting Side Ways
Offline

Posts: 728

Joined: 5th Nov 2004

Ride: ba falcon

Location: perth
WA, Australia

my footwell rear console and cigarette lighter are all red.. did it with glass paint (painted the current globes). they have melted a little in places. id sugest getting the ones of that narva website prob oh and it looks fully sik
Top
 Profile  
 
 
Posted: Thu Nov 25, 2004 10:28 pm 
Technical Contributor
Offline
User avatar

Age: 38

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Well here's an example of what I did for the rear courtesy lights:

Image Image

Image Image

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Fri Nov 26, 2004 8:31 am 
Technical Contributor
Offline

Age: 37

Posts: 6047

Joined: 12th Nov 2004

Ride: Ford Ef Futura

Location: Perth
WA, Australia

How hard was it to run the LED's and where did you get them from? Also is ther a doco on the install here?
Top
 Profile  
 
 
Posted: Tue Nov 30, 2004 9:46 am 
Technical Contributor
Offline

Age: 37

Posts: 6047

Joined: 12th Nov 2004

Ride: Ford Ef Futura

Location: Perth
WA, Australia

Ok.

Firstly, my Futura has those two angled white lights andled towards the steering wheel and on the same angle for the passenger side. My interior light gives off a yellow colour as if it is detoriating. Can I make my interior light like bringht like my angled ones?

Second, putting the Blue LEDs in the dash, how hard and time cpnsuming is this? As I intend to replace my cluster with a mid series cluster, would it be easier doing it to the mid series cluster then replacing it in the dash? Is this possible?

Third, under my air vents under the centre console is a sauasge shaped panel. It is possible to put lights under here?

Thanks
Top
 Profile  
 
 
Posted: Wed Dec 01, 2004 2:40 pm 
Oompa Loompa
Offline

Age: 43

Posts: 29

Joined: 5th Nov 2004

Location: Sydney
NSW, Australia

dang thats nice. i like that. Can you place courtesy lights in a EA with non existant ones? lol how would you go bout wiring em up
Top
 Profile  
 
 
Posted: Wed Dec 01, 2004 2:54 pm 
Technical Contributor
Offline
User avatar

Age: 38

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

You could but jeez I reckon it would be a bastard of a job.
You'd probably be better off sourcing the roof lining and wiring from a car with them to start you off.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Thu Dec 16, 2004 12:54 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 740

Joined: 20th Nov 2004

Ride: BA Falcon

Location: Melbourne
VIC, Australia

voxace wrote:
I'm thinking for the dome light, (so that I can still bloody see) I should keep the stock globe in there (maybe sleeved), and add several blue LEDs - do you think that would come out crappy?
not at all... but you could use a "luxeon" 1 watt LED (f**k bright buggers!) for the white one. much brighter than the "high brightness" LEDs and a bit cooler colour temprature than the globe.

im changing my dash lights to really icy white leds next weekend, and might use a 1 watt led for the climate control setup.

cheers
ryan
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 25 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Apr 24, 2024 4:17 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names