Fordmods Logo

Rear Footwell Lamp in AU,Adding the Low Coolant sensor to EL 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Rear Footwell Lamp in AU,Adding the Low Coolant sensor to EL
Posted: Sat Dec 18, 2004 10:22 pm 
Parts Gopher
Offline
User avatar

Posts: 64

Joined: 16th Nov 2004

Ride: 97 Falcon EL GLi

Location: Melbourne
VIC, Australia

Hi,

I added the Footwell lamp to my EL quite easily, but when i tryed to add one to my dad's AU, i couldn't find any appropraite wiring to attach the bulb to the doors. I have a just brought a Low Coolant sensor for my EL as well, and i found the a connector for it underneath the surge tank which i think should work. Should i just use the connector to wire up the low coolant sensor to that connector?, and simply install a bulb to the low coolant warning lamp?

Also, could some please post a picture of someone has done a LED mod to their EF/EL in white LED's. Good pic hosting site is http://www.glowfoto.com/
Top
 Profile  
 
 
Posted: Sun Dec 19, 2004 12:11 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 10126

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

Have you checked the EL mod doco section on here? Will tell you everything you need to know about adding your coolant sensor. You don't specify which EL you have, my GLi I needed to run an extra wire to my cluster for that to work! Fairmont cluster btw!

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Sun Dec 19, 2004 2:42 pm 
Parts Gopher
Offline
User avatar

Posts: 64

Joined: 16th Nov 2004

Ride: 97 Falcon EL GLi

Location: Melbourne
VIC, Australia

I have a GLi
Do i have to have to run the wire to there. I found the connector which fits underneath the surge tank next to the fuel pump relays. I was just wondering if that would work.

also: If I use 15K MCD lights, how can i reduce the output to like 6K MCD.
Could some please post a picture of a white LED installation in a EF/EL
Top
 Profile  
 
 
Posted: Mon Dec 20, 2004 12:36 am 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 1000491

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

for the au u will need to run a positive wire to to interior lamp line from the centre overhead light!

or do what i did...... add a wire to the headlamp switch and BEM too much effort

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Mon Dec 20, 2004 9:28 am 
Parts Gopher
Offline
User avatar

Posts: 64

Joined: 16th Nov 2004

Ride: 97 Falcon EL GLi

Location: Melbourne
VIC, Australia

Disco Frank,

How would i wire it up to the BEM or Headlamp Switch.
Also another Question, how do you change the rear demister switch blub?
I changed blubs for everything else, but i can't find that one
Top
 Profile  
 
 
Posted: Mon Dec 27, 2004 8:43 am 
Parts Gopher
Offline
User avatar

Posts: 64

Joined: 16th Nov 2004

Ride: 97 Falcon EL GLi

Location: Melbourne
VIC, Australia

Doesn't anyone have a white LED dash???
Top
 Profile  
 
 
Posted: Mon Dec 27, 2004 2:31 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 1000491

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

6CYL wrote:
Disco Frank,

How would i wire it up to the BEM or Headlamp Switch.
Also another Question, how do you change the rear demister switch blub?
I changed blubs for everything else, but i can't find that one



mm i used the wiring diagram in the gregory's book
it a pain in the a** to do it that way, bets way is to find the + wire for the dome light and tap into that.

the rear demister bulb is in the switch itself ( i pressuming it AU ) u need to take the switch out

 

_________________

RIP SCOTT

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Oct 21, 2017 2:07 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names