|
| SWC |
|
||
|
Kit may be repairable
|
||
| Top | |
||
| taxi 5L |
|
||
|
not to much to update on the tt,im starting to prep it for dubbo show by shimming the lsd,getting a flange in front of the muffler so when the tyres pop it wont bottom out(4'' exhaust),getting tyres ready im taking 2 sets out,changing all fluids in the car and fitting new water pump as its leaking...
phill |
||
| Top | |
||
| taxi 5L |
|
||
|
just a few pics of the new turbo shields i made and the new heat wrap i got for the wiring harness to stop everythink melting i hope...motor needs a clean it only been out of the workshop twice in the last month
phill You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| taxi 5L |
|
||
|
not much to update on the tt.Took it to dubbo car show and got 2nd in the go to whoa and 4th in the burnouts losing the rear bar in the process.Im on the hunt for a xr/xt ute thats half decent to put the motor in with a c4 and straight lpg to get it engineered.Pics from dubbo are in the events/cruise area...
phill |
||
| Top | |
||
| taxi 5L |
|
||
|
reattached the rear bar today got to love text screws,put my alloy hub caps back on the back and took it for a drive around the block with muffler box and tail pipe off.Its sounds great with turbo's spooling and waste gate noise right under the drivers seat but isnt noisy once the turbos start spooling takes the bark out of the note...
phill |
||
| Top | |
||
| taxi 5L |
|
||
|
Just got back from liverpool after seeing the liverpool crew for a while but the main reason for the trip was to pick up some mickey t ET slicks for the old girl.It does the quarter in 13.1 on 205/65/15 so how much time do the slicks save on the strip ? Would i get 0.25-0.50 sec gain with the slicks on ? any thoughts on this....
phill |
||
| Top | |
||
| needfordspeed |
|
||
|
Depends on your 60 foot time the last time you raced, what was it? Should be able to get it down to the mid to high 1 second mark with slicks as is with your stally etc.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| taxi 5L |
|
||
|
needfordspeed wrote: Depends on your 60 foot time the last time you raced, what was it? Should be able to get it down to the mid to high 1 second mark with slicks as is with your stally etc. 2.02-2.20 60ft's time but theres a few 3.5's too 
|
||
| Top | |
||
| needfordspeed |
|
||
|
What was the 60 foot when you ran the 13.1?
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| taxi 5L |
|
||
|
needfordspeed wrote: What was the 60 foot when you ran the 13.1? 2.02 but was before i bought |
||
| Top | |
||
| needfordspeed |
|
||
|
I'd probably say a 12.8 would be on the cards with a good launch!
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Matt_jew |
|
||
|
So they checked out ok Phill?
I reckon you will run your numbers easily.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| taxi 5L |
|
||
|
needfordspeed wrote: I'd probably say a 12.8 would be on the cards with a good launch! thats what i wanted to hear,12.8 on 7psi sounds good to me  . Pretty keen to see what i can get on 7psi before upping it to 13psi tuneEVL098 wrote: So they checked out ok Phill? I reckon you will run your numbers easily. yeah there ok,tread was abit lighter then stated but got there still on the 16'' ba rims as well for extra $20 i couldnt say no to that... phill |
||
| Top | |
||
| falcontt |
|
||
|
latest on this car ?
|
||
| Top | |
||
| TROYMAN |
|
||
|
falcontt wrote: latest on this car ? i think its long gone,as in he sold it...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |